WHEN THE PRESSURE IS TOO HIGH ON THE GAUGE, OR BETTER YET, WHEN YHOU CAN STOP THE FLOW OF WATER FROM THE JET, WHEN YOU PUT YOUR HAND OVER IT.
N.B: EACH TIME YOU CHANGE THE POSITION OF THE HANDLE ON THE FILTER HEAD, IT'S BETTER TO STOP THE PUMP AND START IT AGAIN
PLACE THE FILTER HANDLE TO "BACKWASH" FOR ABOUT 2 MINUTES, THEN ON "RINCE" FOR ABOUT 1 MINUTE, THEN TO "WHIRLPOOL" OR "RECIRCULATE" FOR 15 MINUTES, THEN BACK TO "FILTER".
Last Updated: 2012-05-19 1:06:49 PM
